82
SETTINGS & TOOLS
Set the desired device to pairing.
3. If
Bluetooth
power is set to off, you will be
prompted to turn power on. Select Yes and
press .
4. The device will appear in the found devices
list menu once it has been located. Highlight
the device and press .
5. The handset will prompt you for the passcode.
Consult the
Bluetooth
accessory instructions for
the appropriate passcode (typically “0000” - 4
zeroes). Enter the passcode and press .
6. Once pairing is successful, select Yes and
press to connect with the device.
7. Once connected, you will see the device listed in
the Paired Devices menu and the Bluetooth
®
device connected icon will show up on
your enunciator when connected to the
Bluetooth
®
device. You can also check out the
connection with a blue icon on the list.
Power
Allows you to set the Bluetooth
®
power On/Off.
1. Open the flip, then press [MENU],,
,.
2. Press Left Soft Key [On].
NOTE By default, your device’s Bluetooth
®
functionality is
turned off.
My Phone Name
Allows you to edit the name of the Bluetooth
®
name and view the address of Bluetooth
®
connection.
1. Open the flip, then press [MENU],,
,.
2. Press Right Soft Key [Options].
3. Press .
4. Press to clear the existing name.
5. Enter a new custom name.
6. Press to save and exit.
To Next Page
Loading...
