LG W1943S-PF User Manual

A3
Connecting the Display
Important
This illustration depicts the general model of connection. Your monitor may differ from
the items shown in the picture.
Do not carry the product upside down holding only the stand base. The product may
fall and get damaged or injure your foot.
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand
1. Place the monitor with its front facing downward on a soft cloth.
2. Assemble the Stand Base(Front, Rear) into the Stand Body in the correct direction.
3. Tie down the base lock to perpendicularity direction.
4
.
Once assembled take the monitor up carefully and face
the front side
Stand Body
Stand Base

LG W1943S-PF Specifications

General

Display diagonal	19 \
Display resolution	1366 x 768 pixels
Vertical scan range	56 - 75 Hz
Horizontal scan range	30 - 61 kHz
Viewing angle, vertical	170 °
Contrast ratio (dynamic)	30000:1
Contrast ratio (typical)	1000:1
Viewing angle, horizontal	176 °
Display brightness (typical)	300 cd/m²
HDCP	Yes
Safety	UL(cUL), TUV-Type, SEMKO
Certification	FCC-B, CE
Product color	Black
Market positioning	-
Compliance industry standards	DDC/CI
LED indicators	Stand-by
Tilt angle range	-5 - 15 °
Panel mounting interface	75 x 75 mm
Power consumption (standby)	1 W
Power consumption (typical)	21 W
Sustainability certificates	ENERGY STAR

Weight and Dimensions

Depth (with stand)	55.6 mm
Width (with stand)	449 mm
Height (with stand)	291 mm
Weight (with stand)	4300 g