LG W1943SE-PF - Specifications

A22
Specifications W1943SE
NOTE
Information in this document is subject to change without notice.
Display
Sync Input
Video Input
Resolution
Plug&Play
Power
Consumption
Dimensions
& Weight
Tilt Range
Power Input
AC-DC Adapter
Environmental
Conditions
Stand Base
Power cord
18.5 inches (47.0 cm) Flat Panel Active matrix-TFT LCD
Anti-Glare coating
Visible diagonal size: 47.0 cm
0.300*0.300 mm pixel pitch
Horizontal Freq. 30 - 61 kHz (Automatic)
Vertical Freq. 56 - 75 Hz (Automatic)
Input Form Separate TTL, Positive/Negative
SOG (Sync On Green)
Signal Input 15 pin D-Sub Connector
Input Form RGB Analog (0.7 Vp-p/ 75 ohm)
Max VESA 1360 x 768 @ 60 Hz
Recommend VESA 1360 x 768 @60 Hz
DDC 2AB
On Mode
: 21W(Typ.)
Sleep Mode ≤ 1 W
Off Mode ≤ 1 W
With Stand Without Stand
Width 44.90 cm / 17.68 inches 44.90 cm / 17.68 inches
Height 36.08 cm / 14.20 inches 29.10 cm / 11.46 inches
Depth 18.30 cm / 7.20 inches 5.56 cm / 2.19 inches
Net 2.5 kg (5.62 lbs)
Tilt -5˚~ 15˚
12V 2.0A
Type ADS-24S-12 1224G*,manufactured by HONOR Electronic
or type MU24-B120200-xx,manufactured by LEADER Electronics
or type LCAP07F,manufactured by Lien Chang
or type DSA-50W-12 1 120420,manufactured by Dee Van
or type LCAP08F,manufactured by Lien Chang
or type ADS-24NP-12-1 12024G,manufactured by HONOR Electronic
or type DSA-36W-12 1 24,manufactured by Dee Van
Operating Conditions
Temperature 10˚C to 35 ˚C
Humidity 10 % to 80 % non-Condensing
Storage Conditions
Temperature -20˚C to 60 ˚C
Humidity 5 % to 90 % non-Condensing
Attached ( ), Detached ( O )
Wall-outlet type