To Next PageTo Next PageWhat to do if my LG W2252TE says 'Check Signal Cable'?
If you see a 'CHECK SIGNAL CABLE' message on your LG Monitor, it means the signal cable between your PC and the display isn't connected. Check the signal cable and try again.
Why does my LG Monitor say 'Out of Range'?
The 'OUT OF RANGE' message appears when the signal from your PC (video card) is outside the horizontal or vertical frequency range of the display. Check the 'Specifications' section of this manual and configure your display again.
How to check the power cord connection on my LG W2252TE?
Ensure the power cord is properly connected to the power outlet.
What to do if the power indicator is flickering on my LG W2252TE Monitor?
If the display is in power saving mode, try moving the mouse or pressing any key on the keyboard to bring up the screen.
What if the power indicator light is not on on my LG W2252TE Monitor?
Press the Power button.
How to unlock OSD on LG W2252TE?
You can unlock the OSD controls at any time by pushing the MENU button for several seconds: the message “OSD UNLOCKED” will appear.
General
