J
Jennifer HolmesAug 6, 2025
What does DRAIN ERROR mean on my LG WD-10PFD?
- MMark GriffinAug 6, 2025
If your LG Washer displays a DRAIN ERROR, it means the appliance hasn't fully drained within 10 minutes.
To Next PageTo Next PageWhat does DRAIN ERROR mean on my LG WD-10PFD?
If your LG Washer displays a DRAIN ERROR, it means the appliance hasn't fully drained within 10 minutes.
What to do if I get a DOOR OPEN ERROR on my LG WD-10PFD Washer?
If you see the DOOR OPEN ERROR on your LG Washer, and you're using the reservation function, or another function, start by closing the door. This should resolve the error. If that doesn't work, it could indicate that the door switch is malfunctioning.
Why does my LG Washer show an IMBALANCE ERROR?
If your LG Washer displays an IMBALANCE ERROR, it could be due to a couple of reasons. First, check if the appliance is tilted. Second, make sure the laundry isn't gathered to one side inside the drum.
What causes a MOTOR ERROR on my LG WD-10PFD Washer?
If your LG Washer displays a MOTOR ERROR, it could be due to a disconnection in the LEAD WIRE ASSEMBLY. Reconnect or repair the connector. Alternatively, the hall sensor might be defective, requiring a replacement of the STATOR ASSEMBLY.
Why is my LG WD-10PFD Washer showing a WATER INLET ERROR?
If your LG Washer displays a WATER INLET ERROR, it means that the water level hasn't reached the required level (246) within 8 minutes after water supply started, or it hasn't reached the preset water level within 25 minutes.
What should I do if my LG WD-10PFD shows a DRY HEATOR ERROR?
If your LG Washer displays a DRY HEATOR ERROR, the Dry Heater might be out of order and needs replacement. It could also mean that the connector of the Dry Heater isn't properly connected to the connector in the Main PWB ASSEMBLY; try reconnecting or repairing the connector. Another possibility is that the Dry fan motor is faulty and needs replacement.
Key features include automatic wash-to-dry, intelligent wash system, and direct drive.
Explains how fuzzy logic optimizes washing time based on temperature and laundry amount.
Describes the use of a pressure sensor for precise water level control in the tub.
Pre-service checks and voltage precautions for troubleshooting.
Procedure for entering and performing QC test mode with specific button presses.
Method to determine water level frequency by pressing specific buttons.
Instructions to check thermistor temperatures using control buttons.
Details on error codes displayed by the washing machine and their meanings.
Troubleshooting guide for abnormal operations with symptoms and service call guidance.
Detailed fault diagnosis and troubleshooting steps for various operational issues.
Detailed breakdown of parts for the washing machine cabinet assembly.
Exploded view illustrating components of the control panel and dispenser.
Exploded view detailing the drum and tub assembly components.
Exploded view showing the various parts of the dryer assembly.
General
