41
VALVE (PRE)
VALVE (MAIN)
VALVE (
DRY)
VALVE (HOT)
1
Disconnect the wiring connector.
1
2
3
4
2
Remove the valve by two screws of the valve
holder.
• Rating : 240V 50Hz
• Resistant : 3.5~4.5kΩ
When reconnecting the connector
1
Open the door completely.
2
Remove the three screws from the hinge.
When removing the Door Assembly, it is
necessary to hold the Bracket that is inner of
the Cabinet Cover.
First, prepare a bucket to put in the remained
water.
Pull it out from hose.
GY/WH - BK
WH/BK - BK
YL/BK - BK
BK/WH - BK
INLET VALVE
DOOR
Removing method of remained water
To Next Page
Loading...
