LG WD-14316RD - Page 35

34
① Disassemble the back cover.
② Remove the bolt.
③ Pull out the Rotor.
③ Unscrew the 2 screws from the tub bracket.
④ Remove the 6 bolts on the stator.
⑤ Unplug the 2 connectors from the stator.
⑥ Disassemble the damper hinges from the tub
and base.
⑦ Separate the dampers.
ROTOR ASSEMBLY, STATOR ASSEMBLY, FRICTION DAMPER
Rotor
Bolt
Friction
Damper
Hinge
(Damper)
(ROTOR ASSEMBLY)
(STATOR ASSEMBLY)
(FRICTION DAMPER)
HOW TO ASSEMBLE THE MOTOR
NOTE
Once removed, replace the damper pin with new
one.