What to do if my LG Washer shows a DOOR OPEN ERROR?
If you are operating the reservation function or another function with the door open, close the door to resolve the error. This error can also appear if the door switch is out of order.
What does a DRAIN ERROR mean on my LG Washer?
A DRAIN ERROR indicates that the washer has not fully drained within 5 minutes.
What causes an IMBALANCE ERROR on my LG WD-14331(6)AD Washer?
An IMBALANCE ERROR can be caused by the appliance being tilted or laundry gathered to one side.
What does WATER INLET ERROR mean on my LG WD-14331(6)AD?
A WATER INLET ERROR means that the water level has not reached level 2 within 4 minutes after water is supplied, or it has not reached the preset water level within 25 minutes.
Why does my LG WD-14331(6)AD show an OVERFLOW ERROR?
If the Washer displays an OVERFLOW ERROR, it means the water is overflowing (over level 8). The drain pump will automatically operate to drain the water.
What causes a MOTOR ERROR on an LG WD-14331(6)AD Washer?
A MOTOR ERROR can occur if the connector in the LEAD WIRE ASSEMBLY is not connected to the connector of the STATOR ASSEMBLY; reconnect or repair the connector. It can also mean that the hall sensor is out of order or defective, in which case you should replace the STATOR ASSEMBLY.
How to fix a DRY HEATOR ERROR on my LG Washer?
A DRY HEATOR ERROR can occur if the Dry Heater is out of order (replace the Dry Heater), the connector of the Dry Heater is not properly connected to the connector in the Main PWB ASSEMBLY (reconnect or repair the connector), or the Dry fan motor is out of order (replace the fan Motor).
General| Maximum spin speed | 1400 RPM |
|---|---|
| Inverter Motor | Yes |
| Loading type | Front |
| Energy efficiency class | A+++ |
| Energy Rating | A+++ |
| Programs | Cotton |
Steps to enter QC Test Mode and check various machine functions.
Lists error codes (IE, DE, FE, PE, UE, LE, CE, DHE) with symptoms and causes.
Continues listing error codes (CE, LE, DHE) with symptoms and causes.
Troubleshooting steps for "No Power" symptom, checking plug, fuse, and internal connections.
Troubleshooting steps for water inlet issues, checking tap, freezing, and filter.
Troubleshooting steps for door not opening, checking error codes and door switch.
Troubleshooting steps for drain issues, checking debris filter and hose condition.
Detailed steps for diagnosing and resolving "No Power" issues, checking fuse and PWB.
Troubleshooting steps for no water supply, checking tap, filter, and inlet valve.
Steps to diagnose why detergent is not flowing into the dispenser.
Troubleshooting steps for heating issues without water, checking pressure switch and PWB.
Troubleshooting steps for drain pump issues, checking hose, impeller, and coil.
Troubleshooting steps for wash heater issues, checking voltage and resistance.
Troubleshooting steps for continuous heating, checking thermistor and its mounting.
Troubleshooting steps for spin issues, checking water level frequency, motor, and connectors.
Troubleshooting steps for the [dHE] error display, checking thermistor and dry duct.
Steps to check for dry heater malfunctions.
Steps to check for dry fan motor malfunctions.
Detailed checks for dry heater resistance, thermostat, and PWB voltage.
Detailed checks for dry fan motor connectivity, voltage, and resistance.
Troubleshooting steps for the door not opening, checking display and door lock.
To Next Page
