LG WD-1438RD - 9. DISASSEMBLY AND REASSEMBLY PROCEDURES; CONTROL PANEL AND DISPENSER DISASSEMBLY

9. DISASSEMBLY INSTRUCTIONS
󳢬 Disassemble and repair the parts after pulling out power cord from the outlet.
CONTROL PANEL
PLATE ASSEMBLY (TOP)
Hook
Control Panel Assembly
Control Panel Assembly
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the PWB assembly connector from Main
lead wire assembly.
Pull out the drawer and unscrew 2 screws.
Push upper hooks down on the top and pull the control
panel.
Disconnect the PWB assembly (Main & Display) from
the control panel by unscrewing 7 screws.
29
Unscrew 2 screws on the back of the top plate.
Pull the top plate backward and upward as shown.
Disconnect the ASSEMBLY connector.
Pull out the drawer and unscrew 2 screws.
Push 2 upper hooks down and pull the control panel.
Disconnect the PWB ASSEMBLY from the control
panel by unscrewing 7 screws.