LG WD13020D1 - How to use washer

14
ow to use washer
H
• Press the Power button to start.
• Press the Start/Pause button.
• Initial conditions
- Wash : main wash
- Rinse : 3 times
- Spin :
• 1300 rpm
[WD13020D/WD13020D1]
• 1200 rpm [WD12020D]
- Water temperature : 40˚C
- Program : Cotton
• Press the Power button to start.
• Select the desired program cycle and options
by turning the program dial and pressing
each button.
Please refer to page 15 ~ 20 on how to set the
program and options.
• Press the Start/Pause button.
1. Cotton automatically
selected upon power on.
2. Manual Selecting
3. Beep on/off
• The Beep on/off function can be set only
during the washing cycle.
• To set the Beep On/Off function follow the
below steps.
1. Turn on the washing machine (by pressing
the Power button).
2. Press the Start/Pause button.
3. Press and hold the Time Delay button
simultaneously for three seconds to set
Beep on/off function.
• Once the Beep on/off function is set, the
setting is memorized even after Power is off.