LG WD13020D1 - Spin selection

18
ow to use washer
H
Spin
[WD13020D/
WD13020D1]
[WD12020D]
2. No spin
3. Rinse Hold
• Rinse Hold is selected by pressing the
spin button repeatedly this function
leaves clothes in the machine;
suspended in the water after the final
rinse without entering into spin.
• To proceed through to a drain or spin,
once the rinse hold function is
completed, select the Spin function on
the program dial and then press the
Start / Pause button.
Check the display lamps as they will indicate
the chosen cycles.
• If No spin is selected, the washer stops
after draining the last rinse water.
1. Spin selection
WD13020D/WD13020D1
- Cotton, Cotton Quick, Rinse+Spin,
Quick 30, Bio Care, Bulky
Rinse Hold - No Spin - 400 - 800 - 1300
- Delicate, Duvet, Baby Care, Boiling Care,
Synthetic, Hand Wash/Wool
Rinse Hold - No Spin - 400 - 800
- Spin
No Spin - 400 - 800 - 1300
• Spin Speed is available according to
the program as follows.
WD12020D
- Cotton, Cotton Quick, Rinse+Spin,
Quick 30, Bio Care, Bulky
Rinse Hold - No Spin - 400 - 800 - 1200
- Delicate, Duvet, Baby Care, Boiling Care,
Synthetic, Hand Wash/Wool
Rinse Hold - No Spin - 400 - 800
- Spin
No Spin - 400 - 800 - 1200
• After selecting the wash course,
the spin speed can be chosen by
pressing the spin button.