To Next PageTo Next PageWhat causes rattling noise in LG WD20 V2S6 Washer?
If your LG Washer is making a rattling and clanking noise, stop the appliance immediately and check the drum for any foreign objects that may be causing the noise.
Why is my LG WD20 V2S6 not drying clothes properly?
If your LG Washer is not drying, try drying again using the Time Dry cycle. You can also hang the clothes in a cool place to air dry. Check the load capacity for the selected cycle and, if necessary, add a Time Dry cycle. Rearrange the clothes and use the Time Dry cycle. Select the highest spin speed allowed for the washing cycle. Check if the water supply tap is closed and ensure the drain pump filter isn't clogged.
Why is my LG Washer making a vibrating noise?
If your LG Washer is making vibrating noises, start by removing any packaging materials that may still be attached to the appliance. Pause the cycle and redistribute the laundry after the door unlocks to ensure the load is balanced. Also, make sure the floor is solid and doesn't flex. Consult the Levelling the Appliance section to adjust the leveling of the appliance.
Why is my LG WD20 V2S6 making a thumping sound?
If your LG Washer is making a thumping sound, it's likely out of balance. Stop the appliance and redistribute the laundry evenly inside the drum. You can also pause the cycle and redistribute the laundry after the door unlocks.
How do I fix the OE WATER OUTLET ERROR on my LG WD20 V2S6 Washer?
If your LG Washer displays an 'OE WATER OUTLET ERROR', you should clean and straighten the drain hose to ensure there are no kinks or blockages. Additionally, check and clean the drain filter to remove any debris that may be obstructing water flow.
How to fix a 1E INLET ERROR on my LG Washer?
If your LG Washer displays a '1E INLET ERROR', try the following: Check another tap in the house to ensure there isn't a general water supply issue. Fully open the tap connected to the washer. Straighten any kinks in the water inlet hose, or reinstall it to ensure proper connection. Inspect and clean the filter of the inlet hose to remove any blockages. If the problem continues, consider replacing the aqua stop supply hose.
Why is the drying performance too low on my LG WD20 V2S6 Washer/Dryer?
If the drying performance of your LG Washer/Dryer is too low or bad, ensure that the water supply tap is open, as water is used for auto-cleaning of the lint-filter on the drum during drying. Also, make sure the drain filter is not clogged, allowing water to drain properly. Check the load capacity for the selected program; if necessary, add a time dry program. Select the highest spin speed allowed for the wash program.
Why is the drying time too long on my LG WD20 V2S6/Dryer?
If the drying time is too long on your LG Washer/Dryer, the ambient temperature might be low. Make sure the temperature is within the allowable range.
Why is my LG WD20 V2S6 Washer/Dryer not draining water?
If your LG Washer/Dryer is not draining water, make sure the drain hose isn't kinked. Also, ensure the drain is not located higher than 1 meter above the floor of the appliance.
How to prevent staining in my LG WD20 V2S6?
To prevent staining in your LG Washer, always measure bleach or softener to avoid overfilling the dispensers, and close the dispenser drawer gently. Use the dispensers to ensure laundry products are dispensed properly at the right time in the cycle. Always wash dark colors separately from light colors and whites to prevent discoloration.
General
