42
• To use the CHECK PROGRAM (QC TEST MODE),while pressing the WATER LEVELbutton,
press the POWERbutton.Do not deposit any laundry in the wash tub while in this mode.
• In QC TEST MODE all LEDs are on and press START(PAUSE) button to check over the following
items.
NO CHECK METHOD DISPLAY CHECK ITEM
1
2
3
4
5
6
7
8
Initial state
Press once
Press twice
Press 3 times
Press 4 times
Press 5 times
Press 6 times
Press 7 times
• water level frequency is on
DISPLAY in the condition of no
water in TUB.
• After detecting laundry amount
the number of pulse is on the
DISPLAY.
• AUTO OFF.
• All LEDS ON.
※264~270 DISPLAY.
• Laundry amount test.
• COLD water ON.
• HOT water ON.
• SHOWER water ON.
• If the LID is opened,alarm sound.
In that case, close the LID.
• DRAIN MOTOR ON.
• DRAIN MOTOR and DRAIN PUMP ON.
• All LEDS OFF.
2) WF-T802, T852