LG WF-T652 - 7. Program Charts

41
• To use the CHECK PROGRAM (QC TEST MODE),while pressing the 󰾠WATER LEVEL󰾡button,
press the󰾠 POWER󰾡button.Do not deposit any laundry in the wash tub while in this mode.
• In QC TEST MODE all LEDs are on and press START(PAUSE) button to check over the following
items.
8.TEST RUNNING WITHOUT WATER
NO CHECK METHOD DISPLAY CHECK ITEM
1
2
3
4
5
6
7
8
Initial state
Press once
Press twice
Press 3 times
Press 4 times
Press 5 times
Press 6 times
Press 7 times
• water level frequency is on
DISPLAY in the condition of no
water in TUB.
• After detecting laundry amount
the number of pulse is on the
DISPLAY.
• AUTO OFF.
• All LEDS ON.
※64~70 DISPLAY.
(The meaning of 64~70 number is
264~270kHz really)
• Laundry amount test.
• COLD water ON.
• HOT water ON.
• SHOWER water ON.
• If the LID is opened, is on the
DISPLAY. In that case, close the LID.
• DRAIN MOTOR ON.
• DRAIN MOTOR and DRAIN PUMP ON.
• All LEDS OFF.
1) WF-T851, T902
WF-T851 WF-T902