To Next PageTo Next PageWhat causes an over current error in my LG Washer?
An over current error on your LG Washer can be caused by two main issues. First, the MAIN PWB ASSEMBLY might be out of order and need replacement. Second, the winding in the STATOR ASSEMBLY could be short-circuited, requiring you to check the STATOR ASSEMBLY winding.
What to do if my LG WM0532HW shows a door open error?
If you're getting a door open error on your LG Washer, make sure the door is fully closed and securely latched. Also, check the electrical connections at the door switch and PWB assembly to ensure they are not loose. If the problem persists, the DOOR SWITCH ASSEMBLY might be faulty and require replacement.
Why does my LG Washer have an IMBALANCE ERROR?
An IMBALANCE ERROR on your LG Washer can occur for several reasons: the load is too small, the appliance is tilted, laundry is gathered to one side, or non-distributable items are in the drum.
What to do if my LG WM0532HW Washer experienced a power failure?
Restart the cycle.
What to do if the water level sensor malfunctions in my LG Washer?
Unplug the power plug and call for service.
What to do if the water overfills in my LG Washer?
Close the water tap, unplug the power plug, and call for service.
What does a water inlet error mean on my LG WM0532HW Washer?
A water inlet error on your LG Washer means that the correct water level isn't reached within the specified time. Ensure that you have correct water level settings.
How to troubleshoot a locked motor error on my LG WM0532HW?
A locked motor error on your LG Washer could stem from several issues: 1. The motor harness might not be properly connected to the stator assembly; ensure these are correctly connected. 2. The electrical contact between the motor harness and the main PWB assembly might be unstable; check and secure these connections. 3. The motor harness between the stator assembly and main PWB assembly might be cut; repair the motor harness. 4. The hall sensor could be defective; consider replacing it.
Why is my LG Washing machine showing a DRAIN ERROR?
A DRAIN ERROR on your LG washing machine indicates that the machine did not fully drain within 10 minutes.
Why does my LG Washing machine show an imbalance error?
An imbalance error in your LG washing machine can occur for several reasons: * The load is too small. * The appliance is tilted. * Laundry is gathered to one side. * Non-distributable items are in the drum.
General| Energy Star Certified | Yes |
|---|---|
| Color | White |
| Width | 27 inches |
| Steam Function | Yes |
| Stackable | Yes |
| Delay Start | Yes |
| Child Lock | Yes |
| Smart Connectivity | No |
| Type | Front Load Washer |
Explains grounding requirements for safety and electrical shock prevention.
Bolts to prevent internal damage during transport.
Defines necessary space around the washer for proper operation and access.
Instructions for safe electrical hookup, avoiding extension cords.
Instructions on how to properly position and secure the drain hose.
Details requirements for a stable and level installation surface.
Guides on connecting water hoses, pressure, and leak checks.
Specifies requirements for the electrical outlet connection.
Addresses rattling, clanking, thumping, and vibrating noises.
Steps to take if the washer fails to power on or start.
Details troubleshooting for various error codes like IE, DE, UE, dE, LE, FE, PE, CE, PF.
Covers water leaks, excessive suds, and water entry/drainage problems.
Diagnoses why the washer might not be spinning.
Lists exclusions from the limited warranty coverage.
