EST. TIME REMAINING
• This display shows:
a) the estimated time remaining
in the cycle when operation.
b) an error code when an error
has been detected.
CYCLE SELECTOR
• Rotate the cycle selector knob
to select the cycle designed for
different types of fabric and
soil level.
START/PAUSE button
• Use this button to
start/stop the washer.
Wash, Rinse temp., Spin speed, Soil Level, Beeper Button.
• Select a water temperature based on the type of load you are washing.
• To change the spin speed, press the Spin Speed button repeatedly
to cycle through available options.
• To change the soil level, press the Soil Level button repeatedly until
the desired setting is on.
• Press Repeatedly to adjust the Volume
OPTION button
• Prewash: Use this option for loads that need
pretreatment.
It adds 16 minutes prewash and drain.
• Rinse + Spin: Use this option to rinse and
then spin.
• Quick Cycle: The Quick offers a quick cycle
time.
• Stain Cycle: Add time to the wash and rinse
for better stain removal. Automatically provide a rinse.
• Tub Clean:?( Use this option to clean tub.)
POWER button
• Use this button to turn
power On/Off.
Delay Wash, Water Plus/*Spinsense, Extra Rinse
• Delay Wash allows the start of any cycle to be delayed for 1~9 hours
• Water Plus adds extra water to the wash and rinse cycles for
superior results
• Extra rinse Provides an additional rinse
DOOR LOCKED lamp
• Light whenever the door of the washer is locked.
• The door can be unlocked by pressing the Start/Pause
button to stop the washer.
To Next Page
Loading...
