Do you have a question about the LG WM2140C* and is the answer not in the manual?
Type | Front Load Washer |
---|---|
Color | White |
Steam Washer | Yes |
Stackable | Yes |
Energy Star | Yes |
Energy Star Certified | Yes |
Wash Cycles | 10 |
Spin Speed (RPM) | 1200 |
Width | 27 in |
Details key features like Direct Drive System, Tilted Drum, Time-Released Dispenser, Load Detection, and Child Lock.
Explains how water temperature, selected temp, and load size determine optimal washing time.
Details the pressure sensor for stopping water supply and controlling spin based on water level.
Explains door operation, unlocking after power failure, and associated clicking sounds.
Explains conditions under which the washing machine door cannot be opened.
Details the conditions that cause the door locked lamp to illuminate.
Explains how to use and activate the Child Lock function for safety.
Lists and illustrates included accessories such as hoses, wrench, tie strap, and caps.
Details the steps for standard installation, including removing shipping bolts, placing on a flat surface, and leveling.
Provides instructions for securely connecting the water inlet hose.
Gives guidance on connecting the drain hose correctly, avoiding twists and submersion.
Explains how to connect the power plug to the outlet and avoid overloading.
Outlines the step-by-step procedure for testing the washer's functions after installation.
Explains operation of essential controls like Power, Start/Pause, Option, and Cycle Selector.
Details cycle options like Delay Wash, Water Plus, Extra Rinse, and the Door Locked Lamp.
Guides on adjusting wash parameters: temperature, spin speed, soil level, and beep volume.
Illustrates the electrical connections and layout of the washing machine components.
Provides a detailed chart of wash cycles, stages, and approximate working times.
Details the procedure to enter and use the Quality Control (QC) test mode for diagnostics.
Explains how to check water level frequency using specific button combinations.
Lists common error codes, their symptoms, and potential causes for the washing machine.
Provides a diagnostic flow chart for common abnormal operations like no power or water inlet issues.
Details troubleshooting steps for 'No Power' issues, involving voltage checks and component inspection.
Provides steps to adjust spin speed to mitigate excessive vibration and noise during operation.
Details the steps for disassembling the control panel and its components.
Provides instructions for disassembling the Main Printed Wiring Board (PWB) assembly.
Details the procedure for disassembling the detergent dispenser unit.
Explains how to disassemble the noise filter component.
Provides instructions for disassembling the outer cabinet cover of the washing machine.
Details the steps for disassembling the washing machine door and its related parts.
Explains how to disassemble and replace the door lock switch assembly.
Provides instructions for disassembling and removing the drain pump assembly.
Details the procedure for disassembling and accessing the thermistor component.
Explains how to disassemble and service the motor and damper components.
Illustrates the exploded view of the cabinet and control panel assembly parts.
Shows the exploded view of the drum and tub assembly components.
Presents the exploded view of the detergent dispenser assembly parts.