79
WM2688H*M Steam Washer Training
Disassembly and Repair
Front Cover, continued
5. Use a flat screwdriver or a putty
knife to loosen the filter cover
and pull it out.
6. Stick the screwdriver into the
cover slot and pry it out
sideways to free it.
7. Drain the sump by pulling out
the little hose by the filter cover.
Let the water (maybe as much
as a quart) drain into a shallow
pan. Don’t pull the hose out so
far you kink it or the water will
not flow.
T- 42
To Next Page
Loading...
