80
WM2688H*M Steam Washer Training
Disassembly and Repair
Front Cover, continued
8. Open the door.
9. Remove the clamp using
special tool 383EER4001A.
10. Lean the cabinet front forward, being
careful to avoid breaking the glass.
The door is HEAVY.
11. Disconnect the door switch connector.
(Remember to replace it upon
reassembly.)
12. Lift the door and front cover off the
cabinet base as an assembly. Lay it
face down on a blanket or some other
protective surface.
T- 43
To Next Page
Loading...
