To Next Page
W
wrightbrianAug 6, 2025
What to do if my LG WM3998HBA.ABLEVUS Washer/Dryer shows an IE INLET ERROR?
- RRonald MooreAug 6, 2025
If your LG Washer/Dryer displays an IE INLET ERROR, the following steps may resolve the issue: * Ensure that the water supply faucets are fully open. * Check that the water inlet hoses are not kinked, pinched, or crushed. Take care when moving the washer during cleaning or maintenance. * Clean the water inlet filters. See MAINTENANCE section for instructions. * Verify that the water supply pressure to the faucet or house is adequate. Check another faucet in the house. Disconnect the water inlet hoses from the washer and run a few gallons of water through the hoses to flush out any dirt. If the flow is too low, contact a plumber to repair the water supply lines. * Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
General
