LG WS1408XMT User Manual (English)

Questions and Answers:

M
Mason MeyerAug 12, 2025
What to do if my LG Washer shows UE UNBALANCE ERROR?
- J
  Justin LandryAug 12, 2025
  If your LG washer displays a UE UNBALANCE ERROR, it could be due to a couple of reasons. The clothes may be too wet at the end of the cycle. Try rearranging the load to allow proper spinning, then close the door and press the Start/Pause button. It may take a moment for the appliance to begin spinning, as the door must be locked first. Alternatively, the load might be too small. In this case, add one or two similar items or smaller articles of clothing to help balance the load, then close the door and press Start/Pause. Again, allow a few moments for the spin cycle to initiate once the door is locked.
S
Stephanie WeberAug 19, 2025
Why does my LG Washer show a UE UNBALANCE ERROR?
- A
  Alison HarrisAug 19, 2025
  If your LG Washer displays a UE UNBALANCE ERROR, it could be due to several reasons related to load balance. First, if the clothes are too wet at the end of the cycle, rearrange the load to allow proper spinning. Close the door and press the Start/Pause button. It might take a moment for the appliance to start spinning, as the door must be locked. Alternatively, if the load is too small, add one or two similar items or smaller articles of clothing to help balance it. Then, close the door and press the Start/Pause button again, allowing a few moments for the spin cycle to initiate once the door is locked.
T
Timothy EwingAug 27, 2025
How to fix 1E INLET ERROR on my LG Washer?
- T
  tsmithAug 27, 2025
  If your LG washer is showing a 1E INLET ERROR, it indicates a water supply issue. First, check another tap in the house to ensure the water supply is adequate. Then, make sure the water supply tap for the washer is fully open. Also, inspect the water supply hoses for any kinks and straighten them or reinstall the water inlet hose if needed. Finally, the filter of the supply hoses may be clogged. Turn off the taps, remove the hose connections to the washing machine, and check and clean the inlet valve filter.
M
Mariah DuffySep 3, 2025
How to fix a 1E INLET ERROR on my LG Washer?
- C
  Crystal ValdezSep 3, 2025
  If your LG Washer is showing a 1E INLET ERROR, it indicates a problem with the water supply. Here's what you should check: * First, ensure that the water supply is adequate by checking another tap in the house. * Next, verify that the water supply tap is fully open. * Also, inspect the water supply hoses for any kinks and straighten them or reinstall the water inlet hose if necessary. * Finally, the filter of the supply hoses might be clogged. Turn off the taps, remove the hose connections to the washing machine, and then check and clean the inlet valve filter.

LG WS1408XMT Specifications

General

Spin Speed	1400 RPM
Color	White
Type	Washer Dryer Combo
Programs	Cotton, Synthetic, Delicate, Hand Wash, Wool, Quick Wash, Intensive, Rinse & Spin, Spin Only, Dry Only, Cotton Dry, Synthetic Dry
Dimensions (H x W x D)	850 x 600 x 550 mm