What to do if my LG Laundry Appliance beeps and then nothing happens when I press a button?
If your LG Laundry Appliance beeps but doesn't respond when you press a button, it's likely that the Control Lock feature is activated. To deactivate it, turn on the washer, then press and hold the button labeled 'Control Lock' (or the button directly beneath where 'Control Lock' is printed) for 3 seconds.
What to do if water supply faucets are not fully open in LG Laundry Appliance?
Ensure that the water faucets connected to your LG Laundry Appliance are fully open to allow adequate water flow.
What to do if water inlet hoses are kinked, pinched, or crushed in LG Laundry Appliance?
Check the water inlet hoses of your LG Laundry Appliance to ensure they are not kinked, pinched, or crushed behind or under the washer. Take extra care when moving the washer during cleaning or maintenance to avoid damaging the hoses.
How to fix low water supply pressure to my LG Laundry Appliance?
First, check another faucet in your house to ensure that the overall household water pressure is adequate and the flow is not restricted. Next, disconnect the water inlet hoses from the washer and run a few gallons of water through the hoses to flush out any dirt. If the water flow remains too low, it is recommended to contact a plumber to repair the water supply lines.
How to stop LG Laundry Appliance from making loud banging noises while filling with water?
If your LG Laundry Appliance makes loud banging noises while filling with water, the issue might be with your home's plumbing. Consider installing a water hammer arrestor to resolve this.
What to do if my LG WSEX200HNA Washer/Dryer beeps but doesn't start?
If your LG Washer/Dryer beeps but doesn't start when you press a button, the Control Lock feature may be turned on. To disable it, power on the washer, then press and hold the button labeled 'Control Lock' (or the button located directly under the Control Lock label) for 3 seconds.
What to do if water inlet hoses are kinked in my LG Washer/Dryer?
Ensure that the water inlet hoses behind or under your LG Washer/Dryer are not kinked, pinched, or crushed. Straighten or replace the hoses if necessary to ensure proper water flow.
How to stop loud banging noises when LG WSEX200HNA Washer/Dryer is filling with water?
Loud banging noises while your LG Washer/Dryer fills with water usually indicate a plumbing issue in your home. Install a water hammer arrestor to resolve this problem.
What to do if water supply faucets are not fully open in LG Washer/Dryer?
Ensure that the water faucets connected to your LG Washer/Dryer are fully open to allow adequate water flow.
Why is there so little water in my LG WSEX200HNA?
HE (High-Efficiency) LG washers are designed to properly wash your laundry while using a minimum amount of water and energy.
General| Brand | LG |
|---|---|
| Model | WSEX200HNA |
| Category | Washer/Dryer |
| Language | English |
Comprehensive safety instructions, warnings, and cautions for safe operation.
Guidelines for safe installation, grounding, usage, and avoiding hazardous conditions.
Step-by-step guide to sorting, loading, adding detergent, and starting a wash cycle.
Solutions for common washer problems, error codes, noises, and operational issues.
Solutions for common dryer problems, error codes, and performance issues.
To Next Page
