To Next Page
C
Carla GreenAug 6, 2025
What to do if my LG WVC9-1410W Washer/Dryer shows a 1E INLET ERROR?
- LLisa WrightAug 6, 2025
If your LG Washer/Dryer displays a 1E INLET ERROR, it means the water supply is inadequate. First, check another tap in the house to ensure the water supply is sufficient. Then, make sure the water supply tap for the washer/dryer is fully open. Inspect the water supply hoses for any kinks and straighten them, or reinstall the hose. Finally, the filter of the supply hose(s) may be clogged. Turn off the taps, remove the hose connections, and clean the inlet valve filter.
General
