L
levansAug 8, 2025
What to do if my LG WKHC152H Washer/Dryer shows an IE INLET ERROR?
- AAnthony MckeeAug 8, 2025
If your LG Washer/Dryer displays an "IE INLET ERROR", ensure that the water supply faucets are fully open. Also, check the water inlet hoses to confirm they are not kinked, pinched, or crushed behind or under the washer. If the issue persists, clean the inlet filters. If after checking these, the water supply pressure to the faucet or house is still too low, check another faucet in the house for adequate household water pressure, run a few gallons of water through the hoses, and if flow is too low, contact a plumber.