INSTALLATIONINSTRUCTIONS
UNPACK THE WASHER
t_ After the washer is in the home, remove the
carton and Styrofoam® shipping base from
the washer.
O Remove the packing block containing the
owner's manual, parts, water hoses, and
laundry product samples.
J
t t
When removing the washer from the carton base,
be sure to remove the tub support in the middle
of the carton base.
If you must lay the washer down to remove the
base packaging materials, always protect the side
of the washer and lay it carefully on its side. Do
NOT lay the washer on its front or back.
Tub support Carton Base
_t Unfasten the cord from the back of thepower
washer.
TOOLS YOU WiLL NEED
• Adjustable Pliers
• Carpenter's Level
10
To Next Page
Loading...
