31
10) Disassembly of Door Lock Switch
① Remove the two door lock attachment screws.
②
Remove the door switch and remove the attachment tube.
11) Disassembly of Heater
① Remove the three heater attachment screws.
② Loosen the nut at the middle of the heater to relieve
the tension on the clamp. Then pull it out of the case.
⑩ Remove 17 screws to release the bearing
housing. Pull the housing away from the tub, but
do not pry it with a screwdriver to avoid
damage.
⑨ Remove four screws to release the tub bracket.
To Next Page
Loading...
