Why does my LG WT7100CW Washer show a UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG Washer typically indicates an issue with load distribution. This can occur if the load is too small; try adding more items to balance it. It can also happen when heavy items are mixed with lighter ones; try to wash similar-weight items together. If the load is tangled, manually redistribute the items in the drum.
What to do if my LG Washer shows an IE INLET ERROR?
The IE INLET ERROR on your LG Washer indicates a problem with the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses for kinks, pinches, or crushing, especially behind or under the washer. The error could also be due to clogged water inlet filters, which may need cleaning. Low water supply pressure to the faucet or house, or leak-limiting hoses can also cause this issue. Finally, the end of the drain hose should be higher than 29.5 inches (75 cm) above the bottom of the washer.
Why does my LG WT7100CW show UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG washer can occur due to several reasons. It may appear if the load is too small; in this case, add additional items to balance the load. This error can also happen when heavy articles are mixed with lighter items; always try to wash items of similar weight to evenly distribute the load. Finally, the load might be out of balance because articles have become tangled. If this occurs, manually redistribute the load.
What to do if my LG WT7100CW shows IE INLET ERROR?
If your LG washer displays an IE INLET ERROR, it could be due to several reasons related to the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses to make sure they are not kinked, pinched, or crushed. Also, the water supply pressure might be too low; check another faucet in the house to ensure adequate water pressure. Avoid using leak-limiting hoses, as they can falsely trip and prevent the washer from filling.
How to fix OE WATER OUTLET ERROR on LG Washer?
The OE WATER OUTLET ERROR on your LG Washer typically means there's an issue with draining water. Check the drain hose to ensure it is free of clogs, kinks, or pinches, particularly behind or under the washer. Also, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer.
What to do if my LG Washer shows OE WATER OUTLET ERROR?
If your LG washer shows an OE WATER OUTLET ERROR, it could be due to a kinked, pinched, or clogged drain hose. Make sure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer. Also, ensure that the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer; if it is, reposition the end of the drain hose lower.
Explains safety alert symbols and defines WARNING/CAUTION statements.
Crucial safety precautions for installing the appliance.
Safety guidelines for operating the washing machine.
Safety measures for cleaning, maintenance, and servicing.
Importance of proper grounding to prevent electrical hazards.
Safety warnings and general advice before installation.
Requirements for the electrical outlet for safe operation.
Safety warnings and steps for connecting water hoses.
Detailed steps for connecting hot and cold water supply hoses.
Instructions on how to properly connect the drain hose.
Verifying installation and connecting power safely.
Safety warnings and general steps to start a wash cycle.
General advice before contacting customer service.
Lists common error messages and their possible causes and solutions.
More error codes, their causes, and troubleshooting steps.
Additional error codes and common noises with solutions.
Additional noise issues and troubleshooting operation problems.
Solutions for issues like not turning on or operating.
Problems with filling, draining, and bleach dispensing.
Solutions for performance problems like wrinkling, staining, and odors.
General| Style | top load |
|---|---|
| Color | white |
| Washer Capacity | 4.5 cubic feet |
| Max Spin Speed | 950 revolutions per minute |
| Spin Speeds | 3 |
| Number of Cycles | 8 |
| Cycle Selections | normal, heavy duty, deep wash, waterproof, bedding, delicates, speed wash, tub clean |
| Options | soak, extra rinse, add garments, delay wash, control lock, water plus, coldwash, rinse+spin, spin only, tub clean, normal, heavy duty, deep wash, waterproof, bedding, delicates, speed wash, tub clean |
| Temperature Settings | 3 |
| Temperature Selections | hot, warm, cold |
| Soil Levels | 3 |
| Internal Heater | no |
| Control Panel | dial, touchpad |
| Delay Start / End | yes |
| Child Lock | yes |
| Cycle Signal | yes |
| Interior Light | no |
| Steam | no |
| Dispenser | single load |
| Smart Home | no |
| Annual Energy Consumption | 220 kilowatt hours |
| Voltage | 120 volts |
| Current | 5 amperes |
Weight and Dimensions| Depth | 28 3/8 inches |
|---|---|
| Height | 44 1/2 inches |
| Width | 27 inches |
| Net Weight | 134.5 pounds |
To Next Page
