Why is my LG Washer not turning on?
If your LG Washer isn't turning on, check that the power cord is properly plugged into a grounded, 3-prong, 120-VAC, 60 Hz outlet. Also, check your house fuse or circuit breaker, and reset the breaker or replace the fuse if necessary, without increasing its capacity. It’s also possible there has been a power outage.
What to do if my LG WT7305C is not filling properly?
If your LG washer isn't filling correctly, ensure that the inlet filters on the fill valves are not clogged. Also, check that the inlet hoses are not kinked or clogged. Make sure that both hot and cold water faucets are fully turned on. Finally, ensure the washer lid is closed completely and that nothing is preventing it from closing.
Why does my LG WT7305C display the UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG washer typically means the load is unbalanced. This can happen if the load is too small, so add additional items to help balance it. It can also occur if heavy articles are mixed with lighter items; try to wash items of similar weight. If the load is tangled, manually redistribute it to allow the washer to rebalance properly.
What to do if my LG WT7305C Washer is leaking water?
If your LG washer is leaking water, inspect the hoses and connectors for leaks, cracks, and splits, and tighten any loose connections. Check if the house drain pipes are clogged by observing if water backs up during the drain cycle. Ensure the drain hose is properly installed and secured to prevent it from coming out during draining. If you're washing a large item, like a pillow or blanket, use the Bedding cycle. Finally, make sure you are using HE (High-Efficiency) detergent and reduce the amount if the load is small or lightly soiled.
What does IE INLET ERROR mean on my LG Washer?
The IE INLET ERROR on your LG washer indicates a water inlet issue. First, ensure that the water supply faucets are fully open. Check that the water inlet hoses are not kinked, pinched, or crushed. If the water inlet filters are clogged, clean them. Also, verify that the household water pressure is adequate. Avoid using leak-limiting hoses, as they can falsely trigger this error.
Why does my LG WT7305C display the dL LID LOCK ERROR?
The dL LID LOCK ERROR on your LG washer means the lid isn't locking properly. Ensure the lid is fully closed and press the Start/Pause button; you should hear a locking sound. Also, check that nothing, including shipping material or clothing, is caught under the lid. If the error persists, it might be a latch mechanism issue.
What does CL CONTROL LOCK FUNCTION mean on my LG WT7305C?
The CL CONTROL LOCK FUNCTION on your LG washer means the control lock is activated to prevent changes to the cycle or operation of the washer. To resolve this, turn off the control lock function in the control panel.
What to do if my LG WT7305C Washer water does not drain or drains slowly?
If water in your LG washer is not draining or drains slowly, ensure that the drain hose is free of clogs or kinks and is not pinched behind or under the washer.
What to do if my LG WT7305C displays the dE LID ERROR?
If your LG Washer displays the dE LID ERROR, make sure the lid is closed properly. If the error persists after closing the lid, it may require service.
Why does my LG Washer have excessive sudsing?
Excessive sudsing in your LG washer is usually due to using too much detergent or the wrong type of detergent. HE detergents are formulated specifically for HE (High-Efficiency) washers and contain suds reducing agents.
General| Type | Top Load Washer |
|---|---|
| Capacity | 5.0 cu. ft. |
| Color | White |
| Energy Star Certified | Yes |
| Spin Speed | 1300 RPM |
| Number of Wash Cycles | 12 |
| Steam Technology | Yes |
| Washer Interior Finish | Stainless Steel |
| Smart Features | Wi-Fi Connectivity, Smart Diagnosis |
| Dimensions | 27 in. W x 44 in. H x 28 in. D |
Emphasizes the importance of reading all safety messages provided in the manual and on the appliance.
Details critical warnings about potential hazards that can cause death or serious injury.
Outlines precautions to reduce the risk of minor injury, product malfunction, or property damage.
Covers final installation checks, power connection, testing the washer, and error code troubleshooting.
Explains common error codes displayed by the washer and their potential causes and solutions.
Addresses problems like water leaks, excessive suds, no operation, and common washer noises.
To Next Page