To Next PageTo Next PageWhy does my LG WT7900HWA-DLGX7901WE show a UE UNBALANCE ERROR?
The UE UNBALANCE ERROR on your LG Washer typically indicates an issue with load distribution. This can occur if the load is too small; try adding more items to balance it. It can also happen when heavy items are mixed with lighter ones; try to wash similar-weight items together. If the load is tangled, manually redistribute the items in the drum.
What to do if my LG Washer shows an IE INLET ERROR?
The IE INLET ERROR on your LG Washer indicates a problem with the water supply. First, ensure that the water supply faucets are fully open. Check the water inlet hoses for kinks, pinches, or crushing, especially behind or under the washer. The error could also be due to clogged water inlet filters, which may need cleaning. Low water supply pressure to the faucet or house, or leak-limiting hoses can also cause this issue. Finally, the end of the drain hose should be higher than 29.5 inches (75 cm) above the bottom of the washer.
How to fix OE WATER OUTLET ERROR on LG Washer?
The OE WATER OUTLET ERROR on your LG Washer typically means there's an issue with draining water. Check the drain hose to ensure it is free of clogs, kinks, or pinches, particularly behind or under the washer. Also, make sure the end of the drain hose is not more than 96 inches (2.4 m) above the bottom of the washer.
General safety advice and symbols.
Critical warnings for safe operation and installation.
Overview of the washer's components and design.
Lists of items that come with or are needed for the washer.
Technical details and dimensions of the washing machine.
Important warnings and checks before starting installation.
Visual guide to the installation steps.
Tools required for setting up the washer.
Guidelines for selecting the best place to install.
Electrical and floor preparation for installation.
Required space around the washer for airflow and hoses.
Steps to safely remove packaging and prepare the washer.
Instructions for attaching water supply lines.
Specific steps for connecting inlet hoses to faucets and washer.
How to properly attach the drain hose.
Procedures for connecting the drain hose to a standpipe or tub.
How to adjust feet for stability and reduce vibration.
Step-by-step guide to leveling the washer.
Final checks and connecting the power cord.
Running a test cycle to verify installation.
Troubleshooting common installation issues.
Safety warnings before the first operation.
General steps for starting a wash cycle.
How to sort clothes for optimal washing results.
Understanding and using garment care symbols.
Guidelines for loading different types of laundry.
Specific loading advice for models with an impeller.
Specific loading advice for models with an agitator.
Introduction to the smartphone app for washer control.
Steps to set up smartphone connection.
How to download and install the LG ThinQ application.
Controlling the washer remotely via the app.
Information on adding custom wash cycles.
Using the app or audible method to diagnose issues.
Routine cleaning of the tub and exterior.
Monthly cleaning of the tub to prevent odor and mildew.
Importance of leaving the lid open after use.
How to remove and clean the detergent dispenser.
Steps to remove scale from internal components.
How to clean the bleach dispenser area.
How to clean filters to ensure proper water filling.
Preparing the washer for storage in freezing temperatures.
Steps to thaw frozen water inlet hoses.
Steps to thaw a frozen drain hose.
Initial checks before contacting support.
Common error codes and their causes/fixes.
Additional error codes and troubleshooting steps.
Troubleshooting motor and voltage related errors.
Details of the warranty coverage for US customers.
Items not covered by warranty and how to get service.
Procedures for resolving disputes via arbitration.
General
