PROGRAM UPDATE GUIDE
1-7
1. HOW TO UPDATE ESS PROGRAM
(1) Rename the file name to download as “LG_(MODEL NAME)_(Vresion).ROM” in upper cases.
ex) XA66 : “LG_XA66_0905180.ROM”
Refer to the Standard for naming of software.
(2) Copy the file to the formatted USB, and burn it.
(3) Move to the USB function, and insert the USB to the set.
The upgrade information will be shown on the screen.
(4) Remove the USB.
(5) Remove and reconnect the power cable when it changes to logo screen from upgrade information.
Then the upgrade process is completed.
2. HOW TO UPDATE SANYO PROGRAM
(1) Change the file name to download as “(MODEL NAME)_(Version).HEX”. in upper cases
ex) XA66: XA66_0809262.HEX
(2) Copy the file to the root folder of USB storage.
(3) Put the USB into the set.
Then the upgrade process will be started with the upgrade information.
(4) If the upgrade process is complete, the set will be rebooted with “Complete” message.
3. HOW TO UPDATE MCS PROGRAM
(1) Change the file name to download as “(MODEL NAME)_(OPTION)_(Version).mcs”.
ex) XA66_0000_02.mcs
(2) Copy the file to the root folder of USB storage.
(3) Put the USB into the set. Change set function to USB function.
Then the upgrade process will be started with the upgrade information. FLD display "UPGRADE".
(4) If the upgrade process is complete, the set will be rebooted with “SUCCESS” message,
and set auto power off.
(5) Pull out the USB Storage. Press the power key.
To Next Page
Loading...
Need help?
General
