To Next PageTo Next Page
Need help?Do you have a question about the LGMG AR14J and is the answer not in the manual?
General| Brand | LGMG |
|---|---|
| Model | AR14J |
| Category | Lifting Systems |
| Language | English |
An imminent situation, that if not avoided, will result in severe injuries or death.
A potentially dangerous situation, that if not avoided, may result in severe injuries or death.
A situation, that if not avoided, may result in minor or intermediate injury.
Failure to follow instructions and safety rules may cause death or serious injury.
Conditions requiring understanding of safe operation rules before vehicle use.
Explains the meanings of symbols, color codes, and characters for LGMG products.
Specifies that the vehicle is used solely for lifting operators and materials to high-altitude workplaces.
Guidelines for maintaining safety signs, including replacement and cleaning.
Warns about the machine not being insulated and the risk of shock from electrical wires.
Highlights the risk of tipping if personnel or materials exceed platform load capacity.
Emphasizes operating on a solid, flat surface and maintaining safety distances from power lines.
Warns against placing body parts in positions with potential crushing hazards.
Prohibits driving on slopes exceeding vehicle ratings and advises on downhill operation.
Mandates wearing safety devices and using seat belt hooks on the platform.
Advises paying attention to blind spots and turntable rotation to prevent collisions.
Lists actions that can lead to component damage, such as using incorrect chargers or improper welding.
Warns against operating in flammable environments and refueling while the engine is running.
Stresses the importance of performing pre-operation inspections and maintenance to prevent machine damage.
Warns about hydraulic oil leaks and the need for qualified personnel for compartment access.
Covers battery safety, including handling acidic substances and risks of explosion and shock.
Provides steps for parking and securing the machine after use, including turning off the power.
Details the procedure for checking tires and wheels for wear and damage.
Details the performance metrics for the AR14J model, including load capacity, height, speed, and tilt angle.
Provides key physical dimensions for the AR14J model, such as length, width, height, and wheelbase.
Details the engine specifications for the AR14J model, including model, displacement, power, and emission standard.
Details the drive system components and their specifications, such as walking and rotary reducers.
Details the hydraulic system components, pressures, and displacements for various functions.
Details the electric system components, including battery model, output voltage, and capacity.
Lists the required capacities for hydraulic oil, engine oil, diesel, reducer, and coolant for the machine.
Illustrates the operational reach and movement capabilities of the AR14J model, including load limits.
Details the performance metrics for the AR16J model, including load capacity, height, speed, and tilt angle.
Provides key physical dimensions for the AR16J model, such as length, width, height, and wheelbase.
Details the engine specifications for the AR16J model, including model, displacement, power, and emission standard.
Details the drive system components and their specifications, such as walking and rotary reducers.
Details the hydraulic system components, pressures, and displacements for various functions.
Details the electric system components, including battery model, output voltage, and capacity.
Illustrates the operational reach and movement capabilities of the AR16J model, including load limits.
Provides information on tire contact pressure and occupied floor pressure for both AR14J and AR16J models.
Details the components and functions of the lower control box, including switches and indicators.
Details the components and functions of the upper control box, including switches, handles, and indicators.
Outlines the essential prerequisites and understanding required before operating the vehicle.
Explains the operator's responsibility for pre-operation inspection and routine maintenance.
Provides a comprehensive checklist for inspecting the vehicle before starting operation.
Reinforces the requirement to understand safe operation principles before using the vehicle.
Highlights the importance of workplace safety assessment by the operator before vehicle deployment.
Lists dangerous situations and environmental factors to be aware of and avoid during workplace inspection.
Reiterates the necessary understanding of safe operation principles before performing functional tests.
Explains that functional tests are used to detect faults before operating the vehicle.
Describes how to conduct a functional test in a safe, level, and obstacle-free environment.
Details tests for emergency stop, vehicle functions, emergency power unit, and platform leveling.
Details tests for emergency stop, horn, foot switch, machine function, auxiliary power, steering, drive/brake, and tilt angle sensor.
Emphasizes understanding safe operation principles before using the machine.
Describes the vehicle as a self-propelled hydraulic device and the operator's responsibility for safety.
Provides step-by-step instructions for starting the engine from the ground or platform control stations.
Explains how to use the emergency shutdown button to stop all functions and shut down the engine.
Details how to use the auxiliary power unit when the main power source fails.
Instructs on operating the machine using the ground control station, including platform adjustment.
Details operating the machine from the platform control station, including steering and driving.
Explains the platform overload indicator and alarm, and the procedure to unload the platform.
Describes the tilt indicator, alarm, and procedures for moving the machine to a level surface.
Explains system fault alarms, indicators, and the display of fault codes.
Provides guidelines for safely parking and storing the machine, including long-term storage.
Explains the Skyguard protective system's function, activation, and benefits for operator safety.
States the requirement for personal fall protection equipment (PFPE) when operating the machine.
Describes the MSSO function for maintaining work when a safety limit is activated.
Explains automatic and manual DPF regeneration procedures and cautions.
Outlines requirements for personnel qualifications, vehicle securing, and transport vehicle capacity.
Details steps to configure the vehicle for transport on trailers, including wheel wedging and brake engagement.
Provides safety guidelines for transporting the vehicle, including wheel locking and part securing.
Provides instructions for safely lifting the vehicle, including boom retraction and sling attachment.
