Need help?Do you have a question about the LGMG AS0607 and is the answer not in the manual?
General| Brand | LGMG |
|---|---|
| Model | AS0607 |
| Category | Lifting Systems |
| Language | English |
Defines signal words like DANGER, WARNING, and NOTICE for safety information.
Details risks associated with electricity and safe distances.
Lists precautions and conditions for safe operation at the workstation.
Warns against risks of abrasions or entrapment by moving parts.
Explains platform and load capacity limits to prevent tilting.
Details limitations and risks when operating on slopes.
Advises against operating in flammable environments.
Safety measures for electrical connections and personal jewelry.
Provides safety measures to prevent falling from the platform.
Importance of correct battery weight for machine stability.
Highlights general dangers and zones to pay attention to.
Details risks of injury from leaks or touching internal parts.
Notes on selecting correct personnel and methods for lifting.
Safety precautions for handling battery acid, gases, and electrical risks.
Covers main power, safety, and key switch modes.
Lists alarm codes and corresponding machine responses for troubleshooting.
Details safety measures and procedures for lifting operations.
Covers safety aspects of moving and relocating the machine.
Explains the location and function of emergency stop switches.
Details how to manually lower the platform in case of power loss.
Details visual checks and document requirements before operation.
Lists risks and factors to check at the workstation.
Lists conditions that must be met before performing function tests.
Further tests for driving speed and braking performance.
Details the conditions and steps for conducting a function test.
Detailed test for lift/lower functions and initiation.
Procedure to test the function of emergency stop buttons.
Tests the platform lifting and lowering mechanisms.
Details how to use the emergency stop buttons.
Explains how to perform emergency lowering.
Safety precautions and steps for transporting the machine.
Procedure for testing and changing hydraulic oil.
Verifying the functionality of emergency stop buttons.
Calibration and testing of the platform overload system.
Tests the machine's ability to drive and brake.
To Next Page
