www.lgmgeurope.com
AS0808 / AS0808E / AS0812 / AS0812E / AS1012 / AS1012E / AS1212 / AS1212E / AS1413
28
Chapter 5 - Emergency operation
Fixed top work panel
If the work panel is jammed or obstructed by a high structure or equipment, stop operating the equipment from the
workstation or ground control equipment and bring the operator and all personnel to a safe position. In this case, the
work panel can be released with the help of necessary equipment and staff. Do not operate the controls in a way that
will cause one or more wheels to come off the ground.
Lifting of tilted equipment
Place the lift truck with sufcient lifting capacity and the equipment with the same capacity on the lifting side under
the chassis. When the forklift truck or equipment is used to lower the work platform chassis, lightly lift the work
platform with a crane or other suitable equipment to prevent it from tipping over.
Post-accident inspection
Check the machine after an accident. First test all functions of the ground control and then the platform control. Keep
the lifting height below 3 m to repair all damage (if necessary) and all controls.
To Next Page
Loading...
