To Next PageTo Next Page
Need help?Do you have a question about the LGMG AS3246 and is the answer not in the manual?
General| Maximum Working Height | 11.7m |
|---|---|
| Weight | 3200kg |
| Gradeability | 25% |
| Travel Speed (Raised) | 0.8km/h |
| Power Source | 48V DC |
| Tyres | Solid |
| Drive Speed | 0.8 km/h (Raised) |
| Turning Radius | 6.5 m (outside) |
Safety considerations for the workstation, including electrical hazards.
Warnings and advice regarding operating on slopes.
Safety guidelines for handling and maintaining batteries.
Steps to secure the machine after operation to prevent unauthorized use.
Controls located on the machine's ground level.
Controls located on the operator's platform.
Fundamental principles for pre-operation inspection.
Detailed checklist and procedures for pre-operation inspection.
General information regarding workstation inspection procedures.
Identifying and assessing workstation hazards before operation.
General information and safety precautions before testing.
Testing functions via the ground controls.
Testing functions via the platform controls.
Overview of the mobile elevating work platform and operator responsibilities.
Procedures for emergency stop and lowering functions.
Instructions for operating the machine from ground controls.
Instructions for operating the machine from platform controls.
Instructions for steering and driving the machine.
How to select different drive speed modes.
Instructions for using the safety prop.
Procedures for stowing and erecting guardrails.
Procedures for extending and retracting the platform deck.
List of error codes and their meanings and responses.
Procedure for releasing the machine's brake.
Safety guidelines for transporting the machine.
Instructions for loading the machine using a forklift.
Safety precautions to follow when lifting the machine.
Guidelines for parking and storing the machine.
Diagram and list of decals for the SS1230E model.
Diagram and list of decals for SS1432E/SS1932E models.
Diagram and list of decals for AS1930E/AS1932E models.
Diagram and list of decals for AS2632E/AS4046E models.
Diagram and list of decals for AS2646E/AS3246E models.
Diagram and list of decals for AS1930/AS1932 models.
Diagram and list of decals for AS2632/AS4046 models.
Diagram and list of decals for AS4650/AS4650E models.
Load capacity details for various platform models.
Technical operating parameters for various machine models.
Recommended hydraulic oils based on temperature.
Table outlining routine checks and maintenance intervals by level.
