LGMG North America Inc.
Operation and Safety Manual
30
7.5 Platform Positioning
Move the platform lifting and lowering switch
according to the mark on the control panel.
The driving and turning functions are
unavailable from the ground controller.
7.6 Operation from the
Platform Controls
1) Turn the key switch to the platform control
position.
2) Pull the emergency stop switch out on both
ground controls and the platform controls to
the ON position.
3) Ensure the battery tray is connected before
running the machine
7.7 Platform Positioning
1) Press the lift function selector switch.
2) Press the enable switch on the control
handle.
3) The platform will raise when the control
lever is moved to the backward, or lower
when the control lever is moved to the
forward.
7.8 Steering
1) Press the drive function selector switch.
2) Press the enable key on the control handle.
3) Turn the wheels in the desired direction
using the rocker switch on the top of control
handle.
7.9 Drive
1) Press the drive function selector switch.
2) Hold the enable switch on the control
handle.
3) To increase speed, slowly move the control
handle away from the centered position. To
decrease speed, slowly return the control
handle to the center position. To stop, fully
return the handle to the center position or
release the enable switch.
4) Coordinate machine drive direction with the
direction arrows on the platform controller
and the platform.
5) When the platform is elevated, the drive
speed of the machine is reduced.
6) The status of the battery pack will affect
machine performance.
7) When the battery level indicator lamp
flashes, driving speed and functional speed
of machine will be reduced.
To Next Page
Loading...
Need help?
General
