2) Press one side of the pothole guard and then
other side. Result: The pothole guard will not
move.
3) Lower the platform. Result: The pothole
guard will be returned to the stowed position.
4) Place blocks under the pothole guards
(1.38in×7.9in [3.5cm×20cm] wood block or a
similar material) and elevate the platform.
Result: When the platform elevates a given
height (as shown in the following table), the
alarm will sound. The drive function will be
disabled.
. Table 8 – Pothole Guard Not Deployed Alarm Height
To Next Page
Loading...
Need help?
General
