LGMG North America Inc.
Operation and Safety Manual
9
malfunctioning machine
immediately and stop all operation.
⚫ Be sure to perform all maintenance
and operation according to the
instructions in this manual.
⚫ Be sure to keep all labels and decals
at the appropriate locations. Replace
any that are not legible.
⚫ Be sure to keep this manual in the
manual box of the platform.
△
! Personal Injury Hazards
⚫ Do not operate the machine if it is
leaking hydraulic oil. Leaking
hydraulic oil under pressure can
pierce or burn skin.
⚫ Severe injury may result if any
component below the cover is
touched by mistake. Only trained
technicians can perform
maintenance to the components
under the cover. The operator shall
only perform maintenance before
the pre-operation inspection. Be
sure to keep all compartments
closed and locked during operation
of the machine.
1.4 Battery Safety
△
! Combustion hazards
⚫ The battery contains acid. Wear
protective clothing and safety
goggles when performing
maintenance on the battery.
⚫ Take measures to prevent acid from
overflowing out of the battery or
being touched. Neutralize the
overflowed acid material from the
battery with soda and water.
△
! Explosion danger
⚫ Keep the battery away from any
sparks or open flames. The battery
can release an explosive gas.
⚫ Do not touch the battery terminal or
the cables with any tool that may
cause a spark.
⚫ When the vehicle stops for a long
time, it is necessary to turn off the
main power switch.
△
! Component damage hazard
Do not charge the battery with more
than a 24V battery charger.
△
! Electrocution/Burn hazards
⚫ The battery charger can be
connected to the grounded AC
three-wire power socket.
⚫ On a daily basis, check to see if the
wire cable, electric cable and wiring
To Next Page
Loading...
Need help?
General
