LGMG North America Inc.
Operation and Safety Manual
45
⚫ Ensure that the lifting capacity, loading
surface, loading straps, or rope of the crane
is sufficient to bear the machine weight. For
serial number, please refer to the
nameplate。
8.3 Loading the Machine with
a Forklift
1) Be sure to secure the extending platform, the
controller and the chassis tray. Remove all
movable components from the machine.
2) Completely lower the platform. Keep the
platform folded in each transport process.
3) Use the forklift pockets on both sides of the
ladder.
4) Place the forks of the forklift into the forklift
pockets.
5) Drive the forklift forward to completely insert
the fork into the pockets.
6) Lift the machine by 6in (15cm) and slightly tilt
the fork backward to keep the machine
stable.
7) Keep the machine level when lowering the
fork.
△
! Notice
Component damage may result from the
machine being lifted from its’ side.
To Next Page
Loading...
Need help?
General
