LGMG North America Inc.
Operation and Safety Manual
46
8.4 Lifting Precautions
1) Completely lower the platform. Be sure to
secure the extending platform, the controller
and the chassis tray. Remove all movable
components from the machine.
△
! Notice
Use the center of gravity shown on the
lifting decal on the machine.
2) The spreader can only be attached to the
specified lifting point on the machine shown.
3) There are two lifting holes in the front panel
of the machine, and there are two lifting
holes in the rear end board to use for lifting
the machine.
4) Adjust the lock tool in such a way that the
machine is not damaged and the machine is
kept horizontal.
8.5 Parking and Storage
Follow the parking and storage instructions
below：
1) Drive the machine to a well-protected and
well-ventilated area.
2) Be sure to completely lower the platform.
3) Push the emergency stop switch in to the
OFF position.
4) If necessary, cover the control panel and
the warning signs to protect them against
the environment.
5) If the machine is parked for a long period,
cover the wheels on both sides with a
blocking board.
6) Turn the power supply selector switch to
the OFF position and pull out the key to
avoid starting and unauthorized use of
equipment.
7) If equipped with the optional anti-vandalism
package, the working station and ground
control box can be covered and locked to
prevent vandalism.
.
To Next Page
Loading...
Need help?
General
