www.lgmgeurope.com
AS0808 / AS0808E / AS0812 / AS0812E / AS1012 / AS1012E / AS1212 / AS1212E / AS1413
40
Chapter 11 - Maintenance
11.1 Compliance and follow-up
1) The operator only performs the routine maintenance items specied in this manual.
2) Regular maintenance and inspection must be carried out by a trained maintenance technician according to the
manufacturer's requirements.
Maintenance symbol legend
The symbols in this manual are intended to indicate the corresponding meaning of the instruction. The meanings of
the symbols preceding the maintenance procedure are as follows:
Indicates that the tools are needed for this procedure.
Indicates that new parts are needed for this procedure.
Indicates that the procedure is carried out with the help of the distributor.
11.2 Battery inspection
The good condition of a battery is essential for performance and safe operation. Incorrect electrolyte uid levels or a
damaged cable and wiring can damage the component and even cause risks.
Notice: This inspection is not required for the machine with a sealed battery or maintenance-free battery.
Electrocution Risk
Live operation may result in serious injury or death. Remove all rings, watches and other personal jewellery during
the operating process.
Risk of personal injury
The battery electrolyte is corrosive. To avoid injury, do not expose your hands or other body parts to electrolyte leak-
age. Neutralise the discharged electrolyte with a sodium bicarbonate solution.
Notice: The following inspections must be carried out when the battery level is sufcient.
1) Wear protective clothing and safety glasses.
2) Make sure that the battery cable wiring is secure and free of erosion.
3) Make sure that the battery's locking bar is stable and secure.
4) Remove the valve from the battery ventilation.
5) Check the battery's electrolyte uid level. If desired, add distilled water from the bottom
of the battery uid supply line. Do not add too much distilled water.
6) Install the ventilation valve.
Notice: the protection of the wiring end and the anti-corrosion, seal protect the end of the battery wiring
and the cable against corrosion.
To Next Page
Loading...
