USER MANUAL - SS0407E / SS0507E / SS0607E / AS0607 / AS0607W / AS0607WE / AS0607E / AS0608 / AS0608E
35
Chapter 9 - Operating instructions
9.1 Prohibited operation unless
The safety principles of the machine are understood and implemented.
1) Dangerous conditions are avoided.
2) The inspection before operation is always carried out.
3) The workstation has been checked.
4) A function test is always carried out before use.
5) The machine is used for its designed purpose.
9.2 Basic principles
1) The machine is a self-propelled and electrically boosting device, which has a working platform on a scissor
mechanism. The vibration caused by the machine running does not lead to risks for the operators on the work
platform. The machine can be used to transport the employees and their tools to the specied height above
the ground and also for reaching the workstation above the machine or equipment.
2) The details of each operating aspect are specied in the operating manual.
The operator's responsibilities are to follow all safety measures and descriptions in the operation and
maintenance manual.
3) It is unsafe and even dangerous to use the machine for purposes other than transporting personnel,
equipment, tools and material to the workstation above.
4) Only trained and authorised personnel can operate the machine. If the machine is used by more than one
operator at different times in the same work period, the operators must have the qualication and follow all
safety instructions and the description in the operation and maintenance manual. This means that each new
operator must perform the inspection for operation, the function test and the workstation inspection must be
carried out before the machine is used.
9.3 Emergency stop
1) Push red emergency stop button on the ground or platform control to "OFF" to disable all functions.
2) To reactivate a control function, the red emergency stop button must be pulled out.
9.4 Emergency lowering
Push out the emergency lowering control button.
9.5 Operation on the ground
1) Engage the ignition switch on the ground control.
2) Place the red emergency stop buttons on the platform control and the ground control in the "ON" position.
3) Keep the battery pack properly connected before the machine runs.
9.6 Adjusting platform position
Move the lever according to the sign on the control panel. The driving and steering functions are
not available through ground control.
9.7 Operation on the platform
1) Engage the ignition switch on the platform controls.
2) Place the red emergency stop buttons on the platform control and the ground control in the "ON" position.
3) Keep the battery pack properly connected before the machine runs.
9.8 Adjusting platform position
To Next Page
Loading...
