www.lgmgeurope.com
AS0808 / AS0808E / AS0812 / AS0812E / AS1012 / AS1012E / AS1212 / AS1212E / AS1413
6
Chapter 1 - Safety
1.1 Illustrations for rules and regulations
As this machine is not permitted to drive on the road and the speed of movement is very low, corresponding national
trafc laws are not necessary. The safety instructions in this manual must be followed.
1.2 Danger
Death or serious injury may be caused if the instructions and safety precautions in this manual are not followed.
1.3 Prohibited from operating unless
The safety rules of the machine are understood and implemented.
1)
Dangerous circumstances are avoided. The safety regulations are recognised and understood for the next step.
2) The inspection before operation is always carried out.
3) A function test is always carried out before use.
4) The workstation has been checked.
5) The machine is used for its designed purpose.
6) The manufacturer's instructions and safety instructions, the manufacturer's label of safe operation and the
machine is read, understood and monitored.
7) The safety instructions for the user and local regulations are read, understood and followed.
8) All applicable governmental laws and regulations are read, understood and followed.
9) The correct training for safe operation of the machine is followed.
1.4 Classication of risk
The meaning of symbols, colour codes and signs of the Lingong product are as follows:
1) Safety warning and signs: for warning of potential personal injury etc. Attention all safety instructions below,
to prevent possible personal injury or death.
2) Red: reminder of dangerous situations. Failure to avoid may result in serious injury or death.
3) Orange: reminder of dangerous situations. If not avoided, this may lead to serious injury or death.
4)
Yellow: Remember the dangerous situations. If this is not avoided, this may result in minor or moderate personal
injury.
5) Blue: Remember the dangerous situations. If this is not avoided, a loss of property may arise.
1.5 Design use
The machine is a self-propelled and electric lifting device with a working platform on a scissor mechanism. The vibration
through the machine does not cause risk to operators on the work platform. The machine can be used to transport
employees and their tools to the height above the ground and also to reach the workstation above the machine or
equipment.
1.6 Maintenance of safety signs
1) Replace missing or damaged safety signs and keep safety in mind at all times.
2) Clean the safety sign with natural soap and clean water.
3) Do not use a detergent that may damage the material of the safety sign.
To Next Page
Loading...
