LGMG AS0607 - Chapter 1 - Safety; Risk of Electrocution;Burning; Tilt Risk (Battery Weight); Risk in the Lifting Process

USER MANUAL - SS0407E / SS0507E / SS0607E / AS0607 / AS0607W / AS0607WE / AS0607E / AS0608 / AS0608E
11
Chapter 1 - Safety
Risk of component damage
Do not charge the battery pack with a charger higher than 24VDc.
Risk of electrocution/burning
1) The charger can be connected to the earthed three-core AC outlet.
2) Check every day if the wire, electrical cable and wiring are damaged. Replace the damaged operating parts.
3) Take measures to prevent electric shock caused by touching the battery terminal.
Remove rings, watch and other personal jewellery.
Tilt Risk
Do not use a battery with a weight lower than the original battery. The battery is not only used as a weight balance in
the chassis, but also plays an important role in stabilising the machine. Each battery should reach 37 kg respectively.
The minimum weight of each battery drawer (including the battery) must reach 110 kg respectively.
Risk in the lifting process
When lifting the battery you must select the correct number of persons and lifting method.
1.19 Lock after each use
1) Choose a safe, secure and horizontal parking position without obstructions and heavy trafc.
2) Lower the platform.
3) Turn the ignition key to the “OFF” position and remove the key from the ignition to prevent unauthorised use.
4) Place wheel blocks with a wedge shape.
5) Charge the battery.