Operation Manual of Elevating Work Platform
6
△
! Falling Hazards
All workers in the platform must use
approved safety harnesses and
attach the lanyard to the provided
anchor points in the platform. Each
anchor point is limited to one
lanyard.
Do not climb on or sit on the guard
rail of the platform. Firmly stand on
the platform floor at all times.
Do not climb down the platform
scissors when the machine is
elevated.
Keep the platform floor free from
debris.
Shut down the platform door before
operation.
Do not operate the machine if the
guard rail is not correctly installed.
Do not enter or exit the platform
unless the machine is in the stowed
position.
△
! Crash Hazards
Pay attention to any items or
obstacles within the machine’s sight
line and in any blind spots when
starting or running the machine.
Pay attention to the position of the
extending platform when moving the
machine.
Check the workstation to avoid any
overhead barriers or other possible
hazards in the work site.
Pay attention to any crushing
hazards when holding the guard rail
of the platform.
The operator must follow the
To Next Page
