This document is an owner's manual for the Liberty Model 709-S2 Multi-Purpose Stainless Steel Hose Reel. It provides instructions for assembly, installation, ground mounting, care, troubleshooting, and warranty information.
Function Description
The Liberty Model 709-S2 is a multi-purpose stainless steel hose reel designed for storing and managing garden hoses. It can be mounted on a wall (brick, masonry, or wood) or used as a ground-mounted unit on a lawn, patio, or driveway. The reel features a crank handle for winding the hose and a swivel connector for the leader hose, allowing for easy connection to a water source. Its primary function is to keep garden hoses neatly organized, prevent kinking, and facilitate convenient use and storage.
Important Technical Specifications
- Model: 709-S2
- Material: Stainless Steel (Structural Frame and Spool)
- Assembly Time: Estimated 5 minutes (excluding mounting)
- Mounting Options: Wall-mounted (brick, masonry, wood studs) or ground-mounted.
- Recommended Wall Mounting Hardware (Not Included):
- Brick or Masonry Anchor Sleeves: (4) 7 or 8 mm x 60 mm masonry wall anchors (5/16" x 2 1/2"), (4) Anchor sleeves, (4) Washers, (4) Lock washers, (4) Nuts.
- Brick or Masonry Screws: (4) 7 or 8 mm x 60 mm masonry screws (5/16" x 2 1/2"), (4) Washers.
- Wood Screws: (4) 7 or 8 mm x 60 mm wood screws (5/16" x 2 1/2"), (4) Washers.
- Mounting Hole Sizes:
- For anchor sleeves: 5/16"
- For masonry and wood screws: 1/4" pilot holes
- Tools Required for Assembly: Pliers, Adjustable Wrench, Drill (Not included), Allen Wrench (Included).
- Weight Capacity Consideration: The mounting hardware must support the combined weight of the unit, garden hose, and water. A standard 100' garden hose weighs approximately 15 lbs, and when filled with water, the additional weight can exceed 20 lbs.
- Warranty:
- Structural Frame: Three (3) years from the date of original retail purchase.
- Non-Frame Parts (crank handle, swivel, water connections, leader hose, tires): One (1) year from the date of original retail purchase.
Usage Features
- Easy Assembly: The manual indicates an estimated assembly time of 5 minutes, suggesting a straightforward setup process.
- Crank Handle: A crank handle (Part A) is provided for manually winding the hose onto the reel spool. It is secured with an Allen screw (Part B) using the included Allen wrench.
- Leader Hose Connection: The leader hose (Part C) connects the reel to the water source via a swivel connector. The manual advises spraying silicone spray inside the swivel to lubricate O-rings if turning or kinking occurs.
- Garden Hose Connection: The garden hose attaches directly to the hose connection on the reel spool (Part D).
- Multi-Purpose Design: The reel can be used in various settings, either permanently mounted to a wall or as a portable ground unit.
- Ground Mounting: For ground use, four bumpers (Part B) are inserted into the mounting holes at the base (Part E) of the hose reel. Lubricating the bumpers with water or a light lubricant can ease insertion.
Maintenance Features
- Regular Inspection: Users are recommended to periodically inspect the reel for any surface damage, especially for wall-mounted reels, to ensure the stainless steel mounting hardware is intact.
- Hose Washers: Ensure hose washers are in place and all fittings are secure to prevent leaks.
- Freezing Temperature Precaution: It is crucial NOT to expose the unit to freezing temperatures with water remaining in the plumbing system, as this can damage the swivel. The unit should be drained of any residual water before storing in temperate climates.
- Water Shut-off: Always turn off the water after each use.
- Supervision: DO NOT leave water running through the hose reel unsupervised.
- Freezing Prevention: DO NOT expose the reel to freezing temperatures with water remaining in the unit.
- Water Potability: DO NOT consume water from the garden hose; it is not fit for human consumption.
- Troubleshooting Swivel Issues:
- Kinking Leader Hose: If the swivel head is not rotating, remove the leader hose, turn the square head of the swivel several times, and apply lubricant.
- Leaking Swivel:
- Apply Teflon/Plumber's Tape on threads and ensure fixtures are tightened.
- Check for the presence and condition of the hose washer inside the nut. A new hose washer can be obtained from Liberty Garden Products or a hardware store.
- If O-rings are worn (in older swivels), contact Liberty Garden Products for a new set.
- If issues persist, contact customer service.
- Warranty Claims: For warranty claims, customers must notify Liberty Garden Products in writing (via mail or email) or by telephone, providing a full description of the defect and proof of purchase. The company will issue a Return Merchandise Authorization (RMA) if the claim merits review.
- Cleaning: The limited warranty does not cover defects due to improper or inadequate cleaning.
To Next Page
Need help?
General
