18
Obtaining a Blood Sample
Refer to Lancing Device “Instructions for Use” for
detailed instructions.
• Never share a lancet or lancing device.
• Lancets are for single use only.
From Fingertip
1. Prepare fingertip by washing hands in warm,
soapy water. Rinse well. Dry thoroughly.
2. Place end of Lancing Device
against tip of finger. Lance
fingertip.
3. Set Lancing Device aside. To help blood drop
form, lower hand to waist level, gently massage
finger from palm to fingertip. Allow blood
drop to form before attempting to apply to Test
Strip.
Always remove and discard used Lancet in
appropriate container when testing is complete.
TR_OB_GutsENG_E4LBT04.qxd:TT_OB_GutsENG.qxd 9/30/08 10:29 AM Page 18
To Next Page
Loading...