9
➀ Contact End -
Insert into Test Port with contact
end facing up
.
➁ Sample Tip -
Bring sample (fresh, capillary or
venous blood or Glucose Control) to edge of Tip.
Tip draws sample into Strip for testing.
Sample Placement
Correct Placement Incorrect Placement
• Allow sample (blood or Glucose Control drop)
to be drawn into Sample Tip.
• Do not smear or scrape drop with Strip.
• Do not apply more sample to the Strip after
removing from drop.
Note: Do not apply blood or Glucose Control to
top of Test Strip!
Note: Do not insert Sample Tip with sample into
Meter for testing. May cause Meter not to
turn on.
Test Strip
12
Top of Test Strip
TR_OB_GutsENG_E4LBT04.qxd:TT_OB_GutsENG.qxd 9/30/08 10:29 AM Page 9
To Next Page
Loading...