Liberty System - Meter Setup: Configuring Date Information; Setting the Current Minutes; Setting Month, Day, and Year Values

4. The month (number) flashes.
To change, press “ + ” or “ - ”
to select the month. Press “ S ”
to set.
5. The day (number) flashes. To
change, press “ + ” or “ - ” to
select the day. Press “ S ” to set.
6. The year flashes. To change,
press “ + ” or “ - ” to select
the year. Press “ S ” to set.
Note: Day of the week (Mon, Tue, Wed,
Thu, Fri, Sat, Sun) self-adjusts
when month, day or year are
changed.
Note: Meter beeps every time a setting
is confirmed (“ S ” is pressed).
24
TR_OB_GutsENG_E4LBT04.qxd:TT_OB_GutsENG.qxd 9/30/08 10:29 AM Page 24