Testing Reminder
Up to four Testing Reminders per day may be set.
Reminder sounds at set time for 10 seconds.
Reminder turns off when Strip is inserted for testing.
To set the Testing Reminders:
1. After pressing “ S ” to set Ketone
Testing Alert, Display shows first
Reminder setting (A-1). Press “ + ”
(on) or “ - ” (off) to turn Reminder
on or off.
2. If “on” is chosen, press “ S ” . The
hour flashes. Press “ + ” or “ - ” to
set the hour. To set AM/PM, scroll
(press “ + ” or “ - ”) until “AM” or
“PM” is next to correct time.
Press “ S “ to set.
Note: “AM” or “PM” will not display if the
Meter is factory set to 24-hour time format.
If “off ” is chosen and the “ S ” is pressed,
the Meter goes to the next Testing
Reminder set-up.
3. Press “ + ” (on) or “ - ” (off) to turn
Reminder on or off.
4. The minutes flash. Press “ + ” or
“ - ” to set the minutes.
Press “ S ” to set.
26
TR_OB_GutsENG_E4LBT04.qxd:TT_OB_GutsENG.qxd 9/30/08 10:29 AM Page 26
To Next Page
Loading...