Name: LIBRATONE TRACK Air+
Brand: LIBRATONE
Rating: 5 (1 reviews)

To Next Page

Libratone TRACK Air+

First aid for settings and troubleshooting

(Information regarding ﬁrmware update V111, 04/2020)

First use of TRACK Air+ (update ﬁrmware):

For the best product experience, Libratone recommends that you always update Libratone products

with the latest ﬁrmware. Updated ﬁrmware may be available for your new Libratone product. Please

follow the steps below to update the ﬁrmware.

1. Check whether your TRACK Air+ is running with the latest ﬁrmware update V111.

2. Go to „Settings“ in the Libratone App to check the current ﬁrmware of your TRACK Air+.

3. If ﬁrmware V111 is not installed on the TRACK Air+, check in the Libratone app on the start page

whether a red arrow appears in the TRACK Air+ product selection.

Other manuals for LIBRATONE TRACK Air+

Questions and Answers:

Need help?

Do you have a question about the LIBRATONE TRACK Air+ and is the answer not in the manual?

General

Type	In-ear
Bluetooth	Bluetooth 5.0
Water Resistance	IPX4
Charging Port	USB-C
Driver Size	5.3 mm
Frequency Response	20 Hz - 20 kHz
Impedance	16 Ohms
Microphone	Yes
Touch Controls	Yes
Noise Cancellation	Active Noise Cancellation (ANC)
Weight	5.5 g (each earbud)
Bluetooth Codecs	AAC, SBC
Battery Life	6 hours (earbuds), 24 hours (with case)